Riassunto

Screenshot

Video

Commenti

Commento di tofutuxx

Select orb then click another orb to swap their positions. Keep swapping orb positions until each group of 3 is separated from all other groups (no overlapping).

Commento di Koraman

Move the lines to make several small triangles.A successful uncrossing changes the color of the lines--leave that triangle alone and work the others.

Commento di Wowzir

In order to start the Cassa con chiusura di faglia puzzle, click on the Arcane Device which is on the floor near the chest

/way Nazjatar 75.3, 24.5 Click Arcane Device to start

;)

Commento di bbrett786

Along with the jellie jumping quest, this is yet another I will probably never do again. Horrible quest.

Commento di joxie

in kal'methir citadel at 67/36, go in building, take steps to left its upstairs, click on chest to start

Commento di Libraridan

Avoid. Solved!

Another losing design.

Commento di knotjad

A couple tips to note prior to quest:

The World Quest won't pop up until you are nearby the chest. You need to be close, inside the area.
Try not to pull everything zerging inside. The quest is only startable being out-of-combat.

Good luck on the next part!

Commento di SlySnake

It seems to me the goal is to make all closed loops, no matter how many nodes each loop has.

Commento di Dawnwheeler

Just for a piece of Chum lol

Commento di Blackbrd

Extremely helpful. Was getting very frustrated. thanks a bunch!

Commento di Barleduq

Note: This looks like, BUT IS NOT, the same game that is known as Tangled, or Entangled, that's been on the net for over a decade. THere is no way to move INDIVIDUAL nodes. You MUST swap two. I ended up with 4 different polygons on the first one of these I did.

Also, there are three pages. I don't know how many different quests there are, but people are putting coords for different quest locations on the same page. Also, at the time I was doing it on NA realm, 2 of the quests showed as up for EU and not NA, and the third didn't show as up at all. :/

-Barleduq

Commento di ordamo

if you are bugged and can't go out of the minigame use this macro (or right click the aura)
/cancelaura arcane leylock

Commento di Tuvstarr77

Too bad people show How to solve but not HOW to actually find this place, I can't find those ghosts at all and I have been into every darn house been below and above there is nothing. :\ Or I got a graphic glitch. :\

Commento di alpanhell

The most annoying thing about these quests is trying to find them and fighting through the mobs to get to them.

Commento di JDLKY

Edit; this applies mainly to those puzzles with lots of nodes (21+). The ones with 9 nodes are so easy that no help is needed. Nodes are the little fuzzy circles lines end in. The ones with nodes in the mid teens while easier than the larger ones still need that technique.

These DO NOT have to be done in groups of three. In fact almost none of the ones I am doing now (on eight toons) are triangles. In fact you can have simple lines if it works out that way.

The method I use is simple. I take the longest lines and move them back closer to the other end of the line. I think of this as walking that line back. If possible I want no crossed lines in the process but if I have some I can live with it for now. One approach would be to do this in a 'circular' fashion. Take one long line, move it back, and then go on to the next long line. Then rinse and repeat, on all the long lines, especially those that cross more than one other line. When done you should have a bunch of clusters where the number of opportunities for moving stuff around is dramatically fewer. At this point you can just try things blindly. As you assemble groups keep trying to move the remaining longest lines you have left back closer to their other nodes.

Once you have a clean polygon leave it alone. Only in a very few cases will you ever have to take down a completed polygon.

edit: Later observations.

1) It is common to have a long line where one end has a node with only that line coming out of it and two limes coming out of the other end. It is my experience that moving the node with only one line exiting it is usually better.

2) It is also common to have a node with 2 lines coming out from it to have those lines crossed by a single line node. Fix these early and it simplifies things a lot. Move the single line node and leave the double one for later. Often the node with the second line will have one of its lines disappear fairly routinely.

Commento di CeldorZ

There is a bug that sometimes other objects cover part of nodes. Leave the the way @ordano explained ("/cancelaura arcane leylock") and change an angle and re-enter again

Commento di MultiCirce

What you need to know:

-The objective is to get all lines uncrossed. Light blue means that the connected lines are not crossed, pink lines means they are connected (touching other lines). You click two orbs to uncross their respective line.
- It does not matter if you make few "drawings" when disconnecting the lines, IT DOES NOT HAVE to be one big drawing.
- The easiest way to complete this quest is to pay attention to what UNCROSSED line is connected to an orb making a pink line and connect it to the most outer orb; thus uncrossing the lines and making light blue figures (polygons).
- If you make a light blue drawing, leave it alone and continue with the remaining orbs, DO NOT TOUCH light blue completed polygons trying to free other lines.

I hope this helps and happy headache! :)

Commento di dartworth

This quest desperately needs an addon.

It always makes me feel stupid :(

Commento di alpanhell

If you're having a problem, like I was, where half the puzzle disappears behind a wall or something. Try facing a different direction when you click on the device to start the puzzle.

Nice testing Blizz...

Commento di alpanhell

Commento di Rudy199

Damn, can't believe i am too dumb for this.

Commento di Doloria

The don't overthink-it solution to leylocked chest quests
*You don't have to plot out a complicated sequence of moves*
There is more than one solution to a puzzle.

Start at the top so that the first shape you untangle is away from the others.
If the tangled shape has 4 or more sides, click on the lowest dot and then on a dot in the same shape that is higher. Repeat. Reverse a move if you don't like it.
If working on a shape doesn't separate it from another shape, be counter-intuitive. Click on a dot in one shape and connect it to a dot in a different shape. This opens new options.
An untangled shape turns blue-violet.

If you want to create a border shape that contains other shapes:

Start at top and connect the next dot to a dot on the perimeter (ignore its shape). Repeat.
Once you have an outline shape, start on the inside shapes.

See the achievement . It's found in the Achievements list under "Exploration/Battle for Azeroth" near the bottom.

quests are are always located in a Highborne ruin in northeast Nazjatar.

Commento di nostariel

the Strano Coltello d'ArgentoStrange Silver Knife that starts this quest chain is looted from a chest at 39, 49 in Nazjatar.

Commento di adamfazai

Nope
I will not waste my time on this EVER

Commento di KlassyKylie

When I first started this I was like...oh hell no.

I actually managed to finish it under 3 minutes. No idea how. I am thinking it is my amazing ability to do puzzles? Idk, but I will never do this again. Lol.

Commento di slayer50513

I cannot understand why they decided to make these all the same line color for each group. It's hard to see for me and I'm someone who is well-sighted, if your sight isn't as good in any way this world quest is completely awful in its design.

Commento di 1967884

Windows 10 makes this world quest much easier to solve. 🔍👍

Collegamenti

Cassa con chiusura di faglia

	Districa le linee di faglia per sbloccare la cassa (1)

Guadagni

Al completamento di questa missione otterrai:

75 reputazione con Liberti
75 reputazione con Ankoan Lamaonda

Puoi controllare se l'hai già completato digitando:

/run print(C_QuestLog.IsQuestFlaggedCompleted(56023))

Cassa con chiusura di faglia

Guadagni

Informazioni relative

Contribuisci